|
Kits
|
|
|
|
|
Brunswick Kit (Rail Caps and Corner Miters, hardware) for Bristol/Richmond/Hampton/Genesis and some Sears tables.
Brass Finish.
|
Brunswick Kit (Rail Caps and Corner Miters, hardware) for Bristol/Richmond/Hampton/Genesis and some Sears tables.
Nickel Finish.
|
|
BRNS/BRS/KIT
|
$265.00 (+$17s/h)
|
BRNS/NICKEL/KIT
|
$295.00 (+$17s/h)
|
|
|
Rail Caps
|
|
|
|
|
Obsolete Black Plastic Corner Cap for Brunswick
Bristol, Richmond, Hampton, Genesis and some Sears tables.
Sold individually or in a set of four.
Approximately 4 1/4" wide by 4" long.
|
Hard to Find brown plastic cap for Brunswick Wellington Pool tables. Sold individually or in a set of four.
|
|
EACH
SET OF 4
|
$14.95 (+$6 s/h)
$58.95 (+$12 s/h)
|
EACH
SET OF 4
|
$19.95 (+$6 s/h)
$78.95 (+$12 s/h)
|
|
|
|
|
|
Black plastic rail cap set. Four corners and two sides per set.
Please see image for size details.
|
Black plastic rail cap set. Four corners and two sides per set.
Please see image for size details.
|
|
CB/36-250-N
|
$44.95 (+$12 s/h)
|
CB/36-250-W
|
$44.95 (+$12 s/h)
|
|
|
|
|
|
Bronze finish rail tops and side pieces (set consists of four corners, two sides). These fit many tables, including Olhausen Patriot, Imperial Player, Eliminator, and most Showood tables. 4" long, 3 1/4" wide at back.
|
Brunswick Geneva corner rail cap
|
|
BRZ/CPS
|
$49.95 (+$12 s/h)
|
B/GRC
|
$17.95/ea (+$6 s/h)
|
|
|
|
|
|
Chrome finish rail tops and side pieces (set consists of four corners, two sides). These fit many tables, including Olhausen Patriots.
4" long, 3 1/4" wide at back.
Botom is a threaded stud.
|
Chrome finish rail tops and side pieces (set consists of four corners, two sides). These fit many tables, including Olhausen Patriots. 4" long, 3 1/4" wide at back.
Bottom is a single brace.
|
|
CK/CPS/A
|
$49.95 (+$12s/h)
|
CK/CPS/B
|
$49.95 (+$12s/h)
|
|
|
|
|
|
|
|
|
|
Narrow Plastic Rail Caps.
Six pieces per set (four corners and two sides).
Smooth finish.
|
Bumper Pool Rail Caps.
Four pieces per set.
Antique Brass finish.
|
|
RC/3757
|
$45.95 (+$12s/h)
|
RC/3771
|
$59.95 (+$12s/h)
|
|
|
|
|
|
Rail Caps.
Six pieces per set (four corners and two sides).
Antique brass finish.
|
Rail Caps.
Six pieces per set (four corners and two sides).
Bronze penny-vein finish.
|
|
RC/3770
|
$45.95 (+$12s/h)
|
RC/3769
|
$45.95 (+$12s/h)
|
|
|
|
|
|
Rail Caps.
Six pieces per set (four corners and two sides).
Bright chrome finish.
|
Wide Plastic Rail Caps.
Six pieces per set (four corners and two sides).
Textured finish.
|
|
RC/3768
|
$45.95 (+$12s/h)
|
RC/3767
|
$45.95 (+$12s/h)
|
|
|
|
|
|
Brass corner rail cap, approximate 3 3/4" long,
3/8" at front, 1.5" wide at back.
|
Brunswick rail caps in satin nickel finish.
Pick piece below to order. Part BRNS/RC/NCKL
Six piece set includes 4 corner caps and 2 side miters.
|
|
BCRC/1
|
$19.95/ea (+$6 s/h)
|
Six piece set
Single corner cap
Single side miter
|
$175.00 (+$15 s/h)
$39.95 (+$6 s/h)
$15.00 (+$3 s/h)
|
|
|
|
|
|
Obsolete old stock set of rail caps for some Brunswick and
Sears tables. 3/8" wide at tip. Approximately 4" long and 1 3/4" wide at back. Six piece set as shown.
|
Obsolete old stock for some Brunswick and
Sears tables.
Price is for one corner only.
|
|
OBS/SET
|
$69.95 (+$12s/h)
|
CN/OBS/EA
|
$15.95 (+$6s/h) each
|
|
|
|
|
|
|
Plastic "flat back" corner caps, 5" long, 3 3/8" at back widest point.
Set of four.
|
Six piece set for contour style rails, corners measure
4" at back, 3 3/4" in length.
Fits many tables including some AMF models.
|
|
RB/CNR/FLT
|
$34.95 (+$12s/h)
|
RC/CNTR
|
$44.95 (+$12s/h)
|
|
|
Corner Miters
|
|
|
|
|
Aluminum Corner Miters. Fits 1/2" thick aprons; four pieces per set. Penny-vein finish.
|
Narrow Plastic Corner Miters. Fits 1/2" - 5/8" thick aprons; four pieces per set.
|
|
CM/3791
|
$69.95 (+$12s/h)
|
CM/3786
|
$45.95 (+$12s/h)
|
|
|
|
|
|
Brunswick corner cap mounting bracket.
|
Set of four Black Plastic corner miters 7 7/8 inch long
3 1/4 inch wide. Fits 3/4 inch blinds.
|
|
BRNS/CC/MNT/BRK
|
$10.95 (+$3s/h)
|
BLK/TEX/CM
|
$69.95 (+$12s/h)
|
|
|
|
|
|
Old stock wood grain finish corner miter used on Brunswick
and Sears pool tables. 6 7/8" in length, 3 3/4" in width.
For 1/2" blind aprons.
|
Old stock wood finish corner miter used on Brunswick
and Sears pool tables. 7 1/2" in length, 3 1/2" in width.
For 1/2" blind aprons.
|
|
WG/678
|
$15.95/ea (+$6s/h)
|
OLD/WD/7.5
|
$15.95/ea (+$6s/h)
|
|
|
|
|
|
|
Brass finish corner miter used on Brunswick tables.
6 1/2" long by 3" wide. For 1/2" blind aprons. Used Condition
|
|
|
|
BRS/CNR/6.5
|
$22.95/ea (+$6s/h)
|
|
|
|
|
|
Brunswick/Sears corner miter (obsolete).
6 7/8" in length, 1 1/2" wide.
|
Black Brunswick corner miter. 6 1/2" long x 3 1/4" wide.
Call if you need a different size, we might have it!
For 1/2" blind aprons.
|
|
CC/SRS
|
$11.95/ea (+$6s/h)
|
BB/BLK/CM
|
$14.95/ea (+$6s/h)
|
|
|
|
|
|
Extra wide corner miters in dull brass finish.
8" long by 3 1/4" wide. Fits 3/4" blinds. 4 pieces per set.
|
Extra wide black plastic corner miters.
7 3/4" long by 3" wide. Fits 3/4" blinds. 4 pieces per set.
|
|
CM/WD
|
$79.95 (+$12s/h)
|
BLK/EX/MTR
|
$69.95 (+$12s/h)
|
|
|
|
|
|
High polished silver finish corner miter measuring 8" long, 1 3/4" wide. For a 5/8" thick blind apron. 4 pieces per set.
|
Original wood grain finish corner miter used on some Brunswick and Sears Model tables. 6 1/2" long by 3 1/4" wide for 1/2" thick blind aprons.
|
|
CM/POL/LNG
|
$45.95 (+$12 s/h)
|
OLD/WG/6.5
|
$15.95 each (+$6 s/h)
|
|
|
|
|
|
Obsolete National Penny Vein powdercoat side casting.
|
Obsolete National Penny vein powdercoat corner casting
|
|
NAT/SD
|
$49.95/ea (+$17 s/h)
|
NAT/1/CNR
|
$69.95/ea (+$17 s/h)
|
|
|
|
|
|
Wood Grain plastic set of four corner miters 7 7/8" long by
3 1/4" wide for 3/4" thick blinds aprons.
|
Black finish aluminum corner miters. Fit 3/4" blind aprons. 7" in length only available. Set of 4.
|
|
WG/MITER
|
$69.95 (+$12 s/h)
|
CM/36350 - 7"
|
$69.95 (+$12 s/h)
|
|
|
|
|
|
Wide black plastic rail miters for 1/2" thick blinds. Three lengths available. Set of 4. Click part number to order.
|
Penny Vein finish aluminum corner miters for 3/4"
thick blinds. Set of 4. Available in 7" length.
|
|
CM/3790 - 6.5"
CM/3790 - 7"
CM/3790 - 7.75"
|
$69.95 (+$12 s/h)
|
CM/3791
|
$69.95 (+$12 s/h)
|
|
|
|
|
|
Aluminum corner miters for 1/2" thick blind aprons. Set of 4.
|
Very large corner miter used on Dufferin Pool tables
aluminum - 9 long by 5 5/8" wide. For 5/8" thick aprons.
Pricing is for each corner miter.
|
|
CM/36355
|
$79.95 (+$12 s/h)
|
WW/DUF
|
$45.95 (+$12 s/h)
|
|
|
|
|
|
Corner rail casting used on older Brunswick tables (coin-op as well as Century and others). Bronze finish (shown) and silver finish available. Some don't have the Brunswick "B" logo embossed. Call for availability.
|
Obsolete Brunswick air hockey corner.
|
|
BRUNS/CNR/RAIL
|
$45.00 each
|
B/AH
|
$10.95/ea (+$10 s/h)
|
|
|
|
|
|
Corner casting used on Dufferin Pool tables.
Fits Brunswick Metro as well. Used condition.
|
Side casting used on Dufferin Pool tables.
Fits Brunswick Metro as well. Used condition.
|
|
CC/DUF
|
$49.95 each
|
SC/DUF
|
$49.95 each
|
|
|
|
|
|
Heavy tapered bronze finish corner miters. Set of four.
6 1/2" at top tapering to 4 1/2" at bottom. For 3/4" blind apron.
|
Brunswick Geneva corner miters
|
|
TAP/CM
|
$129.95 (+$20 s/h)
|
BR/GV/MT
|
$18.95 each
|
|
|
|
|
|
Large ribbed corner miter in brushed chrome finish.
7 7/8" in length, 5" in width. For 3/4" wide miter. Set of four.
|
Large ribbed corner miter in brushed bronze finish.
7 7/8" in length, 5" in width. For 3/4" wide miter. Set of four.
|
|
WIDE/CHR/MTR
|
$89.95 (+$20 s/h)
|
WIDE/BRZ/MTR
|
$89.95 (+$20 s/h)
|
|
|
|
|
|
Side pocket top miter, for many Brunswick model tables.
Available in Antique Brass Finish. Brunswick part #51-205651
|
Black plastic Brunswick side pocket top miter
|
|
BRUNS/MITER/BRASS
|
$15.00 (+$3 s/h) each
|
BLK/BRUNS/MITER
|
$5.00/ea (+$2 s/h)
|
|
|
|
|
|
Single Brass finish Rail Cap for many Brunswick models
(1/4" shorter in back height than Hawthorn caps,
but will works on these as well)
|
Brown plastic Brunswick side pocket top miter
|
|
BRS/SNGL
|
$39.95/ea (+$6 s/h)
|
BRN/BRUNS/MITER
|
$5.00/ea (+$2 s/h)
|
|
|
|
|
|
Valley Corner casting.
We usually have a selection of used Valley and Dynamo castings in this style. Please call for price and availability.
Price is per each casting. We usually have used Valley and Dynamo corners, please call for availability.
|
Newer style flat Valley Corner casting.
Price is per each casting.
|
|
VCC/1
|
$110.00 each (+$17 s/h)
|
FVCC/BK
|
$110.00 (+$17 s/h)
|
|
|
|
|
|
Used Valley "Black Cat" corner casting.
Price is per each casting.
|
Older style Dynamo (new old stock) corner casting.
We may have used castings as well, call for price/availability.
Price is per each casting.
|
|
V/BC/CST
|
$65.00 (+$17 s/h)
|
D/CST/921
|
$110.00 (+$17 s/h)
|
|
|
|
|
Next
|
)
 - bottom threaded stud)
 - bottom single brace)
)
)
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
